H. Ahn, M. D. Berg, P. Bose, S. Cheng, D. Halperin et al., Separating an object from its cast, Computer-Aided Design, vol.34, pp.547-559, 2002.

T. Alderighi, L. Malomo, D. Giorgi, N. Pietroni, B. Bickel et al., Metamolds: computational design of silicone molds, ACM Transactions on Graphics (TOG), vol.37, p.136, 2018.

A. Bartle, A. Sheffer, V. G. Kim, D. M. Kaufman, N. Vining et al., Physics-driven Pattern Adjustment for Direct 3D Garment Editing, ACM Trans. Graph, vol.35, 2016.

J. M. Bern, K. Chang, and S. Coros, Interactive Design of Animated Plushies, ACM Trans. Graph, vol.36, 2017.

G. Bharaj, I. W. David, J. Levin, Y. Tompkin, H. Fei et al., Computational design of metallophone contact sounds, ACM Transactions on Graphics (TOG), vol.34, p.223, 2015.

B. Bickel, M. Bächer, M. A. Otaduy, H. R. Lee, H. Pfister et al., Design and Fabrication of Materials with Desired Deformation Behavior, ACM Trans. Graph, vol.29, 2010.

R. Bogue, 3D printing: The dawn of a new era in manufacturing?, Assembly Automation, vol.33, pp.307-311, 2013.

J. Bonet, D. Richard, and . Wood, Nonlinear continuum mechanics for finite element analysis, 1997.

S. Bouaziz, S. Martin, T. Liu, L. Kavan, and M. Pauly, Projective Dynamics: Fusing Constraint Projections for Fast Simulation, ACM Trans. Graph, vol.33, 2014.

J. Brennan, R. Pedreschi, P. Walker, and M. Ansell, The potential of advanced textiles for fabric formwork, Institute of Civil Engineering (ICE)-Construction Materials Journal, vol.166, pp.229-237, 2013.

A. Richard, . Buswell, . Soar, G. F. Alistair, . Gibb et al., Freeform construction: mega-scale rapid manufacturing for construction, Automation in construction, vol.16, pp.224-231, 2007.

A. Yunus, J. M. Çengel, and . Cimbala, Fluid Mechanics: Fundamentals and Applications, 2017.

X. Chen, H. Zhang, J. Lin, R. Hu, L. Lu et al., Dapper: decompose-and-pack for 3D printing, ACM Trans. Graph, vol.34, p.213, 2015.

X. Chen, C. Zheng, W. Xu, and K. Zhou, An asymptotic numerical method for inverse elastic shape design, ACM Trans. Graph, vol.33, issue.3, pp.604-611, 2002.

D. Cohen, -. Steiner, P. Alliez, and M. Desbrun, Variational shape approximation, In ACM Transactions on Graphics (TOG), vol.23, pp.905-914, 2004.
URL : https://hal.archives-ouvertes.fr/inria-00070632

A. James and . Fay, Introduction to fluid mechanics, 1994.

M. Robert, T. J. Foster, and . Ibell, A numerical solution for the shape of fabricformed concrete structures, In Structures, vol.8, pp.17-24, 2016.

H. Fu, D. Cohen-or, G. Dror, and A. Sheffer, Upright orientation of man-made objects, ACM transactions on graphics (TOG), vol.27, p.42, 2008.

M. A. Ganter and P. A. Skoglund, Feature extraction for casting core development, Journal of Mechanical Design, vol.115, pp.744-750, 1993.

R. Goldenthal, D. Harmon, R. Fattal, M. Bercovier, and E. Grinspun, Efficient Simulation of Inextensible Cloth, ACM Trans. Graph, vol.26, 2007.

C. Gosselin, R. Duballet, P. Roux, N. Gaudillière, J. Dirrenberger et al., Large-scale 3D printing of ultra-high performance concrete-a new processing route for architects and builders, Materials & Design, vol.100, pp.102-109, 2016.
URL : https://hal.archives-ouvertes.fr/hal-01383481

P. Mikell and . Groover, Part II -Solidification Processes, Introduction to Manufacturing Processes, 2011.

S. Grunewald, B. Janssen, R. Schipper, K. J. Vollers, and J. C. Walraven, Deliberate deformation of concrete after casting, Proceedings of the Second International Conference on Flexible Formwork, 2012.

R. Guseinov, M. Eder, and B. Bickel, CurveUps: Shaping Objects from Flat Plates with Tension-Actuated Curvature, ACM Transactions on Graphics, vol.36, p.4, 2017.

W. J. Hawkins, H. Herrmann, T. J. Ibell, B. Kromoser, A. Michaelski et al., Flexible formwork technologies: A state of the art review, Structural Concrete, vol.17, issue.6, 2016.

R. Hu, H. Li, H. Zhang, and D. Cohen-or, Approximate pyramidal shape decomposition, ACM Trans. Graph, vol.33, pp.213-214, 2014.

M. Hurd, Formwork for concrete, 1995.

D. Julius, V. Kraevoy, and A. Sheffer, D-Charts: Quasi-Developable Mesh Segmentation, Computer Graphics Forum, 2005.

B. Khoshnevis, Automated construction by contour crafting-related robotics and information technologies, Automation in Construction, vol.13, pp.5-19, 2004.

M. Kilian, S. Flöry, Z. Chen, N. J. Mitra, A. Sheffer et al., Curved Folding, ACM Trans. Graph, vol.27, p.75, 2008.

T. Kwok, W. Wan, J. Pan, C. L. Charlie, J. Wang et al., Rope caging and grasping, Robotics and Automation (ICRA), pp.1980-1986, 2016.

T. Thanh, . Le, A. Simon, S. Austin, . Lim et al., Mix design and fresh properties for high-performance printing concrete, Materials and structures, vol.45, pp.1221-1232, 2012.

C. Alan, N. Lin, and . Huu-quang, Automatic generation of mold-piece regions and parting curves for complex CAD models in multi-piece mold design, Computer-Aided Design, vol.57, pp.15-28, 2014.

Y. Liu, H. Pottmann, J. Wallner, Y. Yang, and W. Wang, Geometric Modeling with Conical Meshes and Developable Surfaces, ACM Trans. Graph, vol.25, issue.3, pp.681-689, 2006.

L. Luo, I. Baran, S. Rusinkiewicz, and W. Matusik, Chopper: Partitioning Models into 3D-printable Parts, ACM Trans. Graph, vol.31, p.129, 2012.

L. Malomo, N. Pietroni, B. Bickel, and P. Cignoni, FlexMolds: Automatic Design of Flexible Shells for Molding, ACM Trans. Graph, vol.35, p.12, 2016.

S. Martin, P. Kaufmann, M. Botsch, E. Grinspun, and M. Gross, Unified Simulation of Elastic Rods, Shells, and Solids, ACM Trans. Graph, vol.29, 2010.

J. Mitani and H. Suzuki, Making Papercraft Toys from Meshes Using Strip-based Approximate Unfolding, ACM Trans. Graph, vol.23, pp.259-263, 2004.

Y. Mori and T. Igarashi, Plushie: An Interactive Design System for Plush Toys, ACM Trans. Graph, vol.26, 2007.

K. Nakashima, T. Auzinger, E. Iarussi, R. Zhang, T. Igarashi et al., CoreCavity: interactive shell decomposition for fabrication with two-piece rigid molds, ACM Transactions on Graphics (TOG), vol.37, p.135, 2018.

W. Raymond and . Ogden, Non-linear elastic deformations, Courier Corporation, 1997.

J. John, A. P. Orr, T. J. Darby, . Ibell, M. Mc-evernden et al., Concrete structures using fabric formwork, The Structural Engineer, vol.89, pp.20-26, 2011.

J. Panetta, Q. Zhou, L. Malomo, N. Pietroni, P. Cignoni et al., Elastic textures for additive fabrication, ACM Transactions on Graphics (TOG), vol.34, p.135, 2015.

J. Pérez, M. A. Otaduy, and B. Thomaszewski, Computational Design and Automated Fabrication of Kirchhoff-plateau Surfaces, ACM Trans. Graph, vol.36, 2017.

J. Pérez, B. Thomaszewski, S. Coros, B. Bickel, A. José et al., Design and fabrication of flexible rod meshes, ACM Transactions on Graphics (TOG), vol.34, p.138, 2015.

M. Popescu, L. Reiter, A. Liew, T. Van-mele, R. J. Flatt et al., Building in concrete with a knitted stay-in-place formwork: Prototype of a concrete shell bridge, Structures, vol.14, pp.322-332, 2018.

M. Popescu, M. Rippmann, T. Van-mele, and P. Block, Automated generation of knit patterns for non-developable surfaces, Humanizing Digital Reality -Proceedings of the Design Modelling Symposium, pp.271-284, 2017.

M. Rabinovich, T. Hoffmann, and O. Sorkine-hornung, Discrete Geodesic Nets for Modeling Developable Surfaces, ACM Trans. Graph, vol.37, 2018.

K. Rose, A. Sheffer, J. Wither, M. Cani, and B. Thibert, Developable Surfaces from Arbitrary Sketched Boundaries, Proceedings of the Fifth Eurographics Symposium on Geometry Processing (SGP '07, pp.163-172, 2007.
URL : https://hal.archives-ouvertes.fr/inria-00337445

P. Robert and . Schmitz, Fabric-formed concrete panel design, Building Integration Solutions, pp.1-15, 2006.

C. Schreck, D. Rohmer, S. Hahmann, M. Cani, S. Jin et al., Nonsmooth Developable Geometry for Interactively Animating Paper Crumpling, ACM Trans. Graph, vol.35, p.10, 2015.
URL : https://hal.archives-ouvertes.fr/hal-01202571

C. Schüller, D. Panozzo, A. Grundhöfer, H. Zimmer, E. Sorkine et al., Computational Thermoforming. ACM Trans. Graph, vol.35, 2016.

C. Schüller, R. Poranne, and O. Sorkine-hornung, Shape Representation by Zippables, ACM Trans. Graph. (Proceedings of ACM SIGGRAPH), vol.37, p.4, 2018.

C. Schumacher, B. Bickel, J. Rys, S. Marschner, C. Daraio et al., Microstructures to control elasticity in 3D printing, ACM Transactions on Graphics (TOG), vol.34, p.136, 2015.

I. Shatz, A. Tal, and G. Leifman, Paper craft models from meshes, The Visual Computer, vol.22, issue.01, pp.825-834, 2006.

J. R. Shewchuk, Triangle: Engineering a 2D quality mesh generator and Delaunay triangulator, Applied computational geometry towards geometric engineering, pp.203-222, 1996.

M. Skouras, B. Thomaszewski, S. Coros, B. Bickel, and M. Gross, Computational design of actuated deformable characters, ACM Transactions on Graphics (TOG), vol.32, p.82, 2013.

M. Skouras, B. Thomaszewski, P. Kaufmann, A. Garg, B. Bickel et al., Designing inflatable structures, ACM Transactions on Graphics (TOG), vol.33, p.63, 2014.

P. Song, B. Deng, Z. Wang, Z. Dong, W. Li et al., CofiFab: coarse-to-fine fabrication of large 3D objects, ACM Transactions on Graphics (TOG), vol.35, p.45, 2016.

N. Umetani, M. Danny, T. Kaufman, E. Igarashi, and . Grinspun, Sensitive couture for interactive garment modeling and editing, ACM Trans. Graph, vol.30, p.90, 2011.

T. Van-mele and P. Block, A novel form finding method for fabric formwork for concrete shells, J. Int. Assoc. Shell and Spatial Structures, vol.52, p.31, 2011.

J. Vanek, B. Galicia, . Benes, . M?ch, O. Carr et al., Packmerger: A 3d print volume optimizer, In Computer Graphics Forum, vol.33, pp.322-332, 2014.

D. Veenendaal and P. Block, Computational form finding for fabric formworks: an overview and discussion, Proceedings of the 2nd international conference on flexible formwork, pp.368-378, 2012.

D. Veenendaal and P. Block, Design process of prestressed membrane formworks for thin-shell structures, Proc. Int. Assoc. Shell Spat. Struct. Symp, 2015.

D. Veenendaal, M. West, and P. Block, History and overview of fabric formwork: using fabrics for concrete casting, Structural Concrete, vol.12, pp.164-177, 2011.

P. Volino, M. Courchesne, and N. M. Thalmann, Versatile and Efficient Techniques for Simulating Cloth and Other Deformable Objects, Proceedings of the 22nd Annual Conference on Computer Graphics and Interactive Techniques (SIGGRAPH '95, pp.137-144, 1995.

P. Volino, N. Magnenat-thalmann, and F. Faure, A simple approach to nonlinear tensile stiffness for accurate cloth simulation, ACM Transactions on Graphics, vol.28, 2009.
URL : https://hal.archives-ouvertes.fr/inria-00394466

A. Wächter, T. Lorenz, and . Biegler, On the implementation of an interiorpoint filter line-search algorithm for large-scale nonlinear programming, Mathematical programming, vol.106, issue.1, pp.25-57, 2006.

C. L. Charlie and . Wang, Computing length-preserved free boundary for quasidevelopable mesh segmentation, IEEE Transactions on Visualization and Computer Graphics, vol.14, pp.25-36, 2008.

C. L. Charlie, K. Wang, and . Tang, Pattern Computation for Compression Garment by a Physical/Geometric Approach, Comput. Aided Des, vol.42, pp.78-86, 2010.

H. Wang, F. James, R. O'brien, and . Ramamoorthi, Data-driven elastic models for cloth: modeling and measurement, ACM Transactions on Graphics (TOG), vol.30, p.71, 2011.

M. Weinstein and S. Manoochehri, Geometric influence of a molded part on the draw direction range and parting line locations, Journal of Mechanical Design, vol.118, pp.29-39, 1996.

. West, Flexible fabric molds for precast trusses, Betonwerk + Fertigteil-Technik, vol.72, pp.46-52, 2006.

M. West, The Fabric Formwork Book: Methods for Building New Architectural and Structural Forms in Concrete. Routledge, 2016.

M. West and R. Araya, Fabric Formwork for Concrete Structures and Architecture, International Conference on Textile Composites and Inflatable Structures, pp.184-188, 2009.

X. Yan and P. Gu, A review of rapid prototyping technologies and systems, Computer-Aided Design, vol.28, pp.307-318, 1996.

M. Yao, Z. Chen, L. Luo, R. Wang, and H. Wang, Level-setbased partitioning and packing optimization of a printable model, ACM Transactions on Graphics (TOG), vol.34, p.214, 2015.

. Xg-ye, . Fuh, and . Lee, Automatic undercut feature recognition for side core design of injection molds, Journal of Mechanical Design, vol.126, pp.519-526, 2004.

. Xg-ye, Y. H. Jerry, K. Fuh, and . Lee, A hybrid method for recognition of undercut features from moulded parts, Computer-Aided Design, vol.33, pp.1023-1034, 2001.

J. Zehnder, E. Knoop, M. Bächer, and B. Thomaszewski, Metasilicone: Design and Fabrication of Composite Silicone with Desired Mechanical Properties, ACM Trans. Graph, vol.36, p.13, 2017.

X. Zhang, X. Le, Z. Wu, E. Whiting, and C. C. Wang, Data-Driven Bending Elasticity Design by Shell Thickness, Comput. Graph. Forum, vol.35, pp.157-166, 2016.